Glass partitions in Dubai

Glass partitions in Dubai — clear lines, certified hardware, calm details

Glass partitions are unforgiving — every misaligned hinge shows, every silicone line that wanders is a permanent eyesore, and every weak substrate fix becomes a customer service nightmare 18 months later. We treat glass partitions like the precision job they are: laser-true templating, certified hardware, mould-resistant neutral-cure silicone, and a snagging walk-through that catches the things a normal eye misses.

Kazmi Homes installs glass partition wall systems, shower glass partitions, office glass partitions, and bespoke decorative glass partitions across Dubai and the UAE. We work in apartments, villas, offices, clinics, restaurants, and retail.

What we install

• Shower glass partition / bath glass partition — frameless hinged, framed sliding, walk-in panel, fixed return — for bathroom glass partition installations of all sizes
• Office glass partitions / glass office partitions — single-glazed clear or frosted, double-glazed acoustic systems, door integrations
• Glass partition wall — full-height residential and commercial space dividers
• Frameless glass partition — pure-glass installs with patch fittings or floor-to-ceiling silicone joints
• Frosted glass partition — acid-etched, sandblasted, or applied film
• Acoustic glass partition — double-glazed laminated systems with proper acoustic seal
• Aluminium and glass partition / metal and glass partition — slim aluminium framing or steel section profiles
• Curved glass partition — bespoke curved tempered glass for feature walls and reception zones
• Folding glass partition / collapsible glass partition — bi-fold and slide-fold systems for restaurants, meeting rooms, terraces
• Decorative glass partitions — fluted, reeded, gradient frost, glass-and-wood partition design, glass block partition
• Restaurant glass partitions — between covers, kitchens, smoking sections, terraces

Shower glass partition Dubai — what we always check

A few things that go wrong on shower glass partitions if the contractor isn't paying attention:

• Substrate behind hinges — must be a solid masonry or cement-board section, not just gypsum.
• Glass thickness — 8mm acceptable for short panels, 10mm standard, 12mm for tall frameless.
• Tempering certification — toughened glass must come from a certified processor; we keep the certificates in the handover pack.
• Silicone cure — neutral-cure mould-resistant only; acid-cure attacks chrome and stains stone.
• Door swing — outward swing is best practice in case someone slips inside.
• Floor falls — the glass must sit on a level surface; correcting screed before glass install is non-negotiable.

Office glass partitions in Dubai — what we install

For office interior fit-out, glass office partitions are usually one of three systems:

1. Single-glazed framed (10-12mm tempered) — slim aluminium edges, top track, or full silicone joints. Good for smaller meeting rooms.
2. Single-glazed frameless — patch fittings or top-and-bottom channel only. Premium look, more careful fixing.
3. Double-glazed acoustic — two layers of glass with an air gap and acoustic seals. The right choice for boardrooms and senior offices where speech privacy matters.

Manifestation (the patterned frosting at eye level) is required by safety regulation in commercial spaces — we apply branded manifestation film or sandblast the pattern into the glass.

Glass partition cost in Dubai — honest ranges

Fabricated and installed:

• Shower glass partition (frameless 10mm) — AED 320–680 per m²
• Shower glass partition (frameless 12mm with premium hardware) — AED 480–950 per m²
• Frosted glass partition (residential, sliding bedroom door) — AED 380–850 per m²
• Office glass partitions (single-glazed, framed) — AED 480–950 per m²
• Office glass partitions (single-glazed, frameless) — AED 680–1,400 per m²
• Acoustic glass partition (double-glazed) — AED 950–2,400+ per m²
• Aluminium and glass partition (industrial steel-look frame) — AED 880–1,800 per m²
• Curved glass partition (bespoke) — quoted per project
• Folding / collapsible glass partition (bi-fold restaurant) — AED 1,400–2,800 per m²

How a glass partition job actually flows

1. Free site visit — measure, identify substrate, agree glass spec and hardware.
2. Written scope and quote — m², glass thickness, hardware brand, manifestation, edge details.
3. Site templating — laser-true template lifted (frameless installs), or precise survey for framed systems.
4. Fabrication — tempered glass cut, edge-polished, holes drilled, manifestation applied off-site.
5. Substrate prep on site — fixings checked, levels confirmed, screed corrected if needed.
6. Glass install — panels lifted, set, sealed with neutral-cure silicone or fixed via patch fittings.
7. Snagging — every silicone line walked, every hinge tested, every door swing confirmed.

Areas we cover

Glass partitions across Dubai — Marina, JBR, Downtown, Business Bay, JVC, JLT, Palm Jumeirah, Dubai Hills, Arabian Ranches, MBR City, Al Barsha, Jumeirah, Umm Suqeim, Al Furjan, Mirdif, Motor City — plus glass partition Dubai work in Sharjah, Ajman, and Abu Dhabi (Saadiyat, Yas, Al Reem, Al Raha) on request.

Related services

Bathroom renovation · Interior fit-out · False ceilings · Wall cladding

Get a glass partition quote → · Project: JVC office glass partition →