Skip to content

Service

Wall cladding in Dubai

TV walls, headboards, lobby features, and exteriors — clad in wood, stone, metal, or PVC with substrate flatness and hidden fixings handled first.

Wall Cladding Dubai — Wood, Stone, Metal, PVC | Kazmi Homes

Wall cladding in Dubai — substrates, fixings, and joints

Most wall cladding failures we get called in to fix have nothing to do with the cladding itself. The substrate wasn't flat. The wrong fixing was used. The MEP behind the panels wasn't planned. Or the joints weren't designed — they were "figured out" on site, and now they look like it.

Kazmi Homes does wall cladding properly: substrate flatness checked first, fixings specified per system, MEP routed and tested before panels go up, and joint lines designed into the layout — not improvised.

Wall cladding designs we deliver

We install interior and exterior wall cladding across villas, apartments, lobbies, offices, and select retail in Dubai and the wider UAE:

  • Wood wall cladding — slat panels (vertical or horizontal battens), MDF profiles, real timber, herringbone or chevron feature walls
  • Stone wall cladding — natural travertine, marble, granite cut to panel; artificial stone wall cladding (GRC, cement-based) for lighter installs
  • PVC wall cladding — mouldable, water-resistant, fast install — best for clinics, kitchens, utility spaces
  • Acrylic wall cladding — high-gloss painted acrylic panels for retail and feature walls
  • Metal wall cladding — stainless steel, brass, brushed aluminium for accent or commercial
  • Decorative wall cladding — 3D wall cladding, geometric panels, fluted MDF, microcement, Venetian plaster
  • Exterior wall cladding panels — aluminium composite (ACP), HPL, fibre cement, natural stone for façades

Where wall cladding earns its money

  • TV walls / feature walls — anchors a room, hides cable runs, gives texture without colour change
  • Headboard walls — softens a bedroom and removes the need for a separate headboard
  • Fireplace surrounds — heat-rated stone or microcement, with proper insulation behind
  • Lobby and entrance walls — first impression at the front door
  • Office reception walls — brand-defining backdrop for the logo or signage
  • Exterior villa accents — stone or wood feature on a façade, not the whole house
  • Kitchen splashbacks — slab marble, porcelain, or PVC instead of subway tile
  • Office boardrooms — slat acoustics that look intentional and absorb sound

Wall cladding cost in Dubai — honest ranges

Supply-and-install with substrate prep and standard fixings:

  • PVC wall cladding — AED 80–180 per m²
  • Wood wall cladding (slat or panel, MDF or real timber veneer) — AED 220–540 per m²
  • Microcement / Venetian plaster wall finish — AED 280–620 per m²
  • Artificial stone wall cladding — AED 280–520 per m²
  • Natural stone wall cladding (travertine, slate, marble) — AED 380–950 per m²
  • Slab marble feature wall (book-matched) — AED 950–3,500+ per m²
  • Metal wall cladding (brushed aluminium, stainless) — AED 380–1,200 per m²
  • Acrylic wall cladding — AED 320–680 per m²
  • 3D wall cladding (decorative GRG/MDF panels) — AED 280–680 per m²
  • Exterior wall cladding panels (ACP, HPL, fibre cement) — AED 220–540 per m² + structure

How a wall cladding installation actually flows

  1. Free site visit — measure walls, check substrate flatness, identify MEP routing, agree material.
  2. Written scope and quote — area, material, fixings, joint design, MEP coordination, finishing.
  3. MEP first — cabling, power, AV runs, access panel locations finalised and tested.
  4. Substrate prep — flatness correction (skim, batten frame, or build-out), moisture check on exterior.
  5. Layout setup — pattern centred, joint lines pre-marked, edge details planned.
  6. Fixing — adhesive, mechanical fix, secret fixing, or rainscreen system per material.
  7. Joint and edge finishing — mitres, scribed edges, silicone or trim where required.
  8. Snagging and protection — every panel inspected, edges protected through other trades.

Interior wall cladding designs we get asked for

A few wall cladding designs we install most often:

  • Vertical fluted MDF — quietest contemporary look, easy to paint, hides cable runs in the rebates
  • Horizontal slat oak — Scandinavian / Japandi mood, works at TV walls and headboards
  • Slab marble book-match — drama for a single wall in a master bath or living room
  • Microcement (full wall, full bathroom) — seamless, modern, very Dubai right now
  • Travertine / textured stone — grounded, warm, ages well
  • 3D geometric MDF panels — gym walls, reception backdrops, retail accent
  • Painted shaker panel — classic, works in heritage-leaning villas

Areas we cover

Wall cladding installation across Dubai — Marina, JBR, Downtown, Business Bay, JVC, JLT, Palm Jumeirah, Dubai Hills, Arabian Ranches, MBR City, Al Barsha, Jumeirah, Umm Suqeim, Al Furjan, Mirdif, Motor City — plus wall cladding work in Sharjah, Ajman, and Abu Dhabi.

Related services

Wood flooring · Marble flooring · False ceilings · Home painting · Interior fit-out

Get a wall cladding quote →

Talk to us

Site visit, then a written scope.

Free, no-obligation. We measure, listen, and come back with materials, sequencing, and a realistic timeline.

Frequently asked questions

Straight answers — the same details we cover on a site visit.

Wall cladding price depends on material. PVC wall cladding starts around AED 80–180 per m². Wood wall cladding (slat or panel) typically runs AED 220–540 per m². Stone wall cladding (artificial or natural cut) runs AED 280–950 per m². Metal wall cladding and decorative panel systems run AED 350–1,200+ per m². Numbers include substrate prep and fixing.

Ready when you are

Free site visit. Written scope. Then a real number.

Tell us about your space — we'll come measure, listen, and reply with a clear scope and timeline. No obligation.